Jax Green Daily
Tuesday, February 26, 2008
Just An Idea...


I came across this article, and I thought it would be a fun project. I know there's a lot going on already, but I think this would be a good idea for the community gardern's lack of an electricity source. Of course, everyone could just throw in a little money to get a DC input that could be used to charge extra batteries or other equipment from a car. Nonetheless, it's still cool to know. I hope to make one of these for myself soon.

Solar Powered Generator For Less Than $300 Bucks...


1) Buy yourself a small solar panel. For about $100 you should be able to get one rated at 12 volts or better (look for 16 volts) at an RV or marine supplies store.

2) Buy yourself a battery. Get any size deep cycle 12 volt lead/acid or gel battery. You need the deep cycle battery for continuous use. The kind in your car is a cranking battery--just for starting an engine. Look for bargains; it should cost about $50-60.

3) Get a battery box to put it in for $10. (This is good for covering up the exposed terminals in case there are children about.)

4) Buy a DC input. I like the triple inlet model which you can find at a car parts store in the cigarette lighter parts section for about $10. This is enough to power DC appliances, and there are many commercially available, like fans, one-pint water boilers, lights, hair dryers, baby bottle warmers, and vacuum cleaners. Many cassette players, answering machines, and other electrical appliances are DC already and with the right cable will run straight off the box.

5) But if you want to run AC appliances, you will have to invest in an inverter. This will convert the stored DC power in the battery into AC power for most of your household appliances. I bought a 115 volt 140 watt inverter made by Power-to-Go at Pep Boys for $50. More powerful inverters are available by mail. Count up the number of watts you'll be using (e.g., a small color television (=60 watts) with a VCR (=22 watts), you'll need 82 watts).

6) Use a drill to attach the meter and DC input to the top of the box.

7) Use insulated wire to attach the meter to the wing nut terminals on the battery. Connect the negative (-) pole first. Only handle one wire at a time. Connect the DC inlet to the battery in the same way. Connect the solar panel to the battery in the same way.

8) Close the lid (I use a bungee cord to keep it tight). Put the solar panel in the sun. It takes 5-8 hours to charge a dead battery; 1-3 hours to top off a weak one. It will run radios, fans, and small wattage lights all night, or give you about 5 hours of continuous use at 115 volt AC, or about hour boiling water. This system may be added on to with larger panels, inverters, and batteries. Options: A pop-up circuit breaker may be added between the positive terminal and the volt meter. Some of you will want an amp meter as well. The panels I recommend have built-in bypass diodes, but I recommend charge controllers for people who have panels without diodes. Another option is a voltage regulator, which is not necessary for a system this small, but a larger system would require one.

 
Comments:
I'm down. I had to buy a new cell phone charger a few weeks ago and was seriously thinking about solar power for it. Also, there's a guy in town who makes windmills for power out of PVC pipe and treadmill motors. The pattern is online:
here

There is a lot going on at the moment, but it'd still be fun if someone started tinkering around with this sort of thing.
 
Post a Comment

Subscribe to Post Comments [Atom]





<< Home
Garden updates, events, news, and thoughts.

Archives
February 2008 / March 2008 / April 2008 / May 2008 / June 2008 /


Powered by Blogger

Subscribe to
Posts [Atom]